preload preload preload preload

The angle contacts the design of the ball bearing – mix the bearing


31st May 2011 Bearing Technology 0 Comments

SKF bearing angle contacts the design of the ball bearing – mix the bearing

The most common high-accuracy angle of SKF bearing contacts the same standard configuration of the ball bearing:

-All steel bearing
-Ceramic ‘ Silicon nitride The balls mix the bearing

Because the silicon nitride ball is lighter than the steel, the balls are quite difficult, mix the bearing stiffness and running speed that can offer the higher intensity are much higher than the constant all steel bearing.

Low centrifugal force of heat that bearing and bearing are being produced of losing weight of ceramic ball of SKF bearing, thus lengthen lubricant which serves life greatly and show extension maintenance intervals. In addition it mixes bearings to be to analogous to insensitivity, damage fast to accelerate and deceleration lead to the fact. The detailed information about silicon nitride, please consult one ” The material ” .

The mixed angle of SKF contacts the ball bearing to fix

-HC of this appointed suffix, such as 7000 CD/HCP4A or
-Prefix c,such as C7012 FB/P7.










  • Leave a Reply

    * Required
    ** Your Email is never shared