preload preload preload preload

TG bearing 63162RZ measurement specification parameter offered


8th December 2015 Bearing products 0 Comments


The deep ditch ball bearing is pushed each other between steel ball and ditch one while bearing the load, exposed to neighbouring area deforming and stress of the position, because of contacting the surface very small, even the load is not too large, it may be quite big to exposed to the stress. It determines the bearing capacity of the bearing to exposed to the stress, its influence factor is mainly exposed to pressing the stress and is distributed of the surfaces, especially shear the stress and is distributed.

The inner circle of bearing moves, the outer lane is rotated, the loaded direction on the axle does not change generally, in this way a little receiving strength is maximum on the inner circle, the ones that produce on this point cut the stress in every cycle (steel ball has rolled in this point) Big than other point, produce tired to destroy first. But to whirling outer lane, it changes to bear some maximums of cutting stress, and the girth of the outer lane is relatively large, so to exposed to fatigue life is longer than the inner circle. On the contrary, fixed to the outer lane, the bearing that the inner circle rotates, the inner circle is more tired and more longe-lived than the contact of the outer lane.

To sum up, in case of low-speed, the inner circle is rotated or the outer lane is rotated, the impact on life-span of the bearing is not very great, but under rotating the operating mode at a high speed, the inner circle rotates and contacts fatigue life than the bearing that the outer lane rotates much longer, the advantage is obvious.

6316-2RZ deep ditch ball bearing parameter, specification, 6316-2RZ (80*170*39mm)

Bearing type: Deep ditch ball bearing

Our country’s new type: 6316-2RZ

Our country’s old type: 180316K

Internal diameter (mm) : 80mm ( 3.1496in)

External diameter (mm) : 170mm ( 6.6929in)

Width (mm) : 39mm ( 1.5354in)

Weight (KG) : 3.62

Basic specified dead load (kN) : 86.5 (8826.53KG)

Basic amount moves load (kN) : 123 (12551.02KG)

Lubricated rotational speed (r/min) of the lipoprotein : 3800

Lubricated rotational speed (r/min) of oil : 4500

Bart bearing ( Hangzhou) Key business of Manufacturing Co., Ltd divide into for make for engineering And brand management (OBM) Two major parts, take the place of workers and make the undertaking and mainly cooperate with global famous bearing brand, offer technological development, design to make; Mainly deal in Bart (Bart) in brand management undertaking Company’s independent bearing brand ” The secret service TG ” .

Bart (Bart) Hangzhou where it has the good reputation of the heaven in human world in the long triangular area of China that the company lies, depend on the information advantage of the long triangular economic zone and position of the internationalized banking centre, rely on prosperous international ocean shipping and airport hub, outstanding talent resources, deep cultural inside information, developed related industry, has accomplished ” secret service TG ” The fast development of the brand, has moulded the overseas influence of the brand, has sped up the steps of marching into the market of international bearing.



Bearing picture of the secret service



The name of product: TG bearing 6316-2RZ measurement specification parameter offered New type: 6316-2RZ old type: 180316K internal diameter: 80( mm) External diameter: 170( mm) Weight: 3.62( kg) Bearing material: Carburization bearing steel (surface hardening type) Use: Common Type: Deep ditch ball bearing










  • Leave a Reply

    * Required
    ** Your Email is never shared