Books and knowledge

As to the sealed bearing, have already filled with appropriate lubricating grease during production; For setting up the seal installation in the host computer in the turning on use of bearing too, in order to avoid the leakage of lubricating grease. This have how much lubricating grease one inject into in bearing for fine problem. There is too little lipoprotein quantity of notes, it is apt to cause lacking the lipoprotein or do and rub, influence the life-span. Note the intersection of lipoprotein and quantity cross, at most can cause to leak in a large amount lubricating grease, pollute the ...

Second, design of axle: 1, generally speaking the material of the axle selects 35 #s and more than high-quality carbon element structural steel for use, can also add the alloying element and improve its performance of heat treatment, after the material is dealt with by the surface of adjusting the quality, quenching etc., the hardness can achieve more ideal result while exceeding the bearing hardness; When it is invaded that there are hard things, imbed the hard thing in the bearing, and does not damage the axle; Will reduce the fatigue life of the axle otherwise. 2, when the surface ...

Lubricated technology Technological summary The rolling bearing fails in sports because of making the bearing abrade constantly in resistance, lubricating grease oil Different from lubricated way, rub the abrasion result differently in reducing the bearing. So lubricated technology has already become the important component of technical research of the bearing. Someone is a handful of lubricating grease oil Called " the fifth part of the bearing " other for inner circle, outer lane rolling body, keeping shelfing . Hinder resistance that rolling bearing rotate from by rolling friction, slip, ...

1The water pump coming into operation newly, generally must change lubricating grease oil after operating 100 hours ,Run and change once every 500 hours each time later. 2Adopt the floating bearing that lubricating grease lubricates, after running for 1500 hours, should change lubricating grease, there can't be too much or too little oil quantity with note, because there is too muchly or too little lubricating grease will cause the bearing to generate heat, the fuel quantity is generally known in 1/2~2/3 of the volume of bearing room. 3For adopting the bearing that the lubricating oil ...

6,The solid is lubricated Under some special service conditions, add solid lubricant of small quantity into lubricating grease, two molybdenum sulfide can reduce the abrasion such as joining for the 1st of 3- 5%, improve and resist and press heat-resisting ability, high temperature, elegance, high vacuum, able to bear, corrode, resist radiation, low-temperature special terms very much, add solid lubricant into engineering plastics or powder metallurgy material, can make and have from the bearing part of lubricated performance, such as bind in line of rolling, keep shelf and roll at the body ...

As to the sealed bearing, have already filled with appropriate lubricating grease during production; For setting up the seal installation in the host computer in the turning on use of bearing too, in order to avoid the leakage of lubricating grease. This have how much lubricating grease one inject into in bearing for fine problem. There is too little lipoprotein quantity of notes, it is apt to cause lacking the lipoprotein or do and rub, influence the life-span. It will cause the bearing warmly to raise at most that the lipoprotein quantity of the note is crossed. The generous leakage of ...

Fill quantity of lubricating grease with in the bearing, 1/2-1/3 of the space are suitable so as to fill bearings. Should be reduced to 1/3 at the time of the high speed. Too much lubricating grease will make Wen Sheng increase. 4,Choice of lubricating grease While choosing lubricating grease according to the working temperature, drip some, oxidize stability and low-temperature performance in major indicator, it is can generally be used for appraising high-temperature performance dripping some, the temperature of real work of the bearing should be lower than dripping by some 10-20 ℃. Using ...

Seventh, the lubricant one is supplementary and changing a.Supplementary spacing interval of lubricating grease Because machinery acts on, the increase wearing out and polluting, lubricated bases filled out will lose its lubricated performance gradually in the bearing is disposed. So, need to supplement and upgrade the lubricated order constantly. The supplementary spacing interval of lubricant will be different because of forming, size and rotational speed of the bearing,etc., supplement the rough spacing interval of lubricating grease according to the needs of time of operating. In ...

4,When the choice of lubricating grease chooses lubricating grease according to the working temperature, drip some in major indicator, oxidize stability and low-temperature performance, it is can generally be used for appraising high-temperature performance dripping some, the temperature of real work of the bearing should be lower than dripping by some 10-20 ℃. Using the temperature to be be lower than dripping by some 20-30 ℃ of synthetic lubricating grease. While choosing lubricating grease according to the bearing load, carry on one's shoulder or back and should select the needle to ...

The markets of different mechanical device, instrument,etc. which use the rolling bearing require performance to be strict day by day, the required condition, performance as to bearing are diversified day by day too. In order to choose the most appropriate bearing from numerous structure, size, need studying from various angles. When being chosen the bearing, generally, consider it as axle difficulty or ease degree, marketability of the space, size and bearing that the bearing allows,etc. that bearing of department is arranged, installed, dismantled, roughly determine the bearing structure. ...