preload preload preload preload

Supply HK2220 and ram the needle bearing stock of the outer lane for a long time


29th April 2013 Bearing Technology 0 Comments

Supply HK2220 and ram the needle bearing of the outer lane and welcome the incoming telegram consulting telephone 13584316877 from stock for a long time Inferior in Changzhou to send the outer lane which rams the needle bearing of the outer lane [1 ] to accurate with the sheet iron ram shaping, the structure space is small, and have larger load capacity. Suitable for installing the space and receiving restriction and shell hole and should not be regarded as the occasion of the ball track. And needn’t be further positioned axially after pressing in the seat hole of the bearing. Main structural style: The bearing coaxiality? The structural features?
? HK? Pierce through the pass and ram the needle bearing of the outer lane
? HK …RS? Pierce through the pass and ram the needle bearing form of outer lane and wear the seal ring
? HK …2RS? Pierce through the pass and ram needle bearing pair of outer lane and wear the seal ring
? BK? Pierce through the pass and ram the needle bearing of the outer lane
? BK …RS? The sealing type rams one side of needle bearing of the outer lane and takes the seal ring
? F? Pierce through the pass and ram the outer lane and install the needle bearing fully
? FY? Dress pass, ram the outer lane and install the needle bearing fully ‘ Limit location of oil
? MF? The sealing type rams the outer lane and installs the needle bearing fully
? MFY? The sealing type rams the outer lane and installs the needle bearing fully ‘ Limit location of oil
This kind of needle bearing does not generally use the inner circle. If need to use the inner circle, can choose the inner circle of Model IR. DF rams the needle bearing of the outer lane and divides punching for bearing both ends HK type And the one end enclosed type BK type of bearing . Compared with piercing through the pass and ramming the needle bearing of the outer lane, one end of the sealing bearing is a shell type, suitable for the shaft end, and can bear the small strength of moving about axially.










  • Leave a Reply

    * Required
    ** Your Email is never shared