preload preload preload preload

NU2210E bearing Kazakhstan and China


25th September 2015 Bearing products 0 Comments

The Sino-Kazakhstan bearing is sold

The Sino-Kazakhstan bearing is sold

The Sino-Kazakhstan bearing is sold

The Sino-Kazakhstan bearing is sold

The Sino-Kazakhstan bearing is sold

The Sino-Kazakhstan bearing is sold

The Sino-Kazakhstan bearing is sold

The Sino-Kazakhstan bearing is sold

The Sino-Kazakhstan bearing is sold


Sub bearing parameter, specification, NU2210E (50*90*23mm) that NU2210E cylinder rolls

Bearing type: Sub bearing of the cylinder roller

Our country’s new type: NU2210E

Our country’s old type: 32510E

Internal diameter (mm) : 50mm ( 1.9685in)

External diameter (mm) : 90mm ( 3.5433in)

Width (mm) : 23mm ( 0.9055in)

Weight (KG) : 0.59

Basic specified dead load (kN) : 88.8 (9061.22KG)

Basic amount moves load (kN) : 74.2 (7571.43KG)

Lubricated rotational speed (r/min) of the lipoprotein : 6000

Lubricated rotational speed (r/min) of oil : 7500

The cylinder rolls the sub bearing is usually blocked guiding by two of one set of circles for a bearing, unless it keep shelf, it roll son if you can’t and not lead by suits of circle, last one composite,usually can bearing of separating. The bearing install, dismantle convenient, act as require, especially, outer lane with axles and shells full of demonstrating their advantages even more while cooperating. Use for this kind of bearing only generally load of bearing on radialing,only, outer lane tape be can last loads or intermittence loads axials larger axials smallered to be lasted uniline bearing of side. Compared with deep ditch ball bearing the same in external dimension, this kind of bearing has loaded ability of greater radial, in view of structure, are suitable for the rotation of high speed too.



The name of product: Kazakhstan and China’s supply of NU2210E bearing New type: NU2210E old type: 32510E internal diameter: 50( mm) External diameter: 90( mm) Weight: 0.59( kg) Bearing material: Carburization bearing steel (surface hardening type) Use: Common Type: Sub bearing of the taper roller










  • Leave a Reply

    * Required
    ** Your Email is never shared