preload preload preload preload

Inlay the bearing technology


25th November 2008 Bearing Technology 0 Comments

Inlay the bearing technology and introduce:

: Leave and arrange in, the hole or trough appropriate in size in order, on the surface of friction between metal wares of matrice of axle bush. Imbed solid lubricant shaped, form and inlay the bearing. Also useful solid lubricant cream such as PTFE milk liquid Pour into these holes or troughs, the characteristic solidified and become is that the bearing capacity is high, work longe-livedly. The bearing is compared with fritting, though it rubs the factor relatively tallly, a low one of abrading rate.

Leave and arrange in, the hole or trough appropriate in size in order, on the surface of friction between metal wares of matrice of axle bush. Imbed solid lubricant shaped, form and inlay the bearing. Also useful solid lubricant cream such as PTFE milk liquid Pour into these holes or troughs, solidified

Though it rubs the factor relatively tallly, the characteristic is that the bearing capacity is high, work longe-livedly. The bearing is compared with fritting. But a low order of magnitude of abrading rate; Compared with covering the membrane bearing, have higher service life and heat resistance; Compared with carbon graphite bearing, the abrading rate is relatively low.

Mainly graphite, PTFE and MoS2 employ different prescription and make the bloated coefficient inlaying the body the same as matrice material of line, the matrice metal of the bearing is as follows, that used as inlaying Casting iron, stainless steel, tin bronze, brass and lead antimony alloy,etc.. Inlay inlaying most solid lubricant that adopted the compound composition of body of the bearing. In order to meet using under the high-temperature condition, can make and can bear low-speed heavily loadedly, be able to bear water, able to bear inlaying the body etc. of the chemical solvent too.

Arrangement.










  • Leave a Reply

    * Required
    ** Your Email is never shared