preload preload preload preload

Import the intersection of NTN NUP305E and cylinder get away sub bearing


28th November 2014 Bearing products 0 Comments

It rolls body to be whether cylinder roll son to the heart rolling bearing. The cylinder rolls within the sub bearing the structure is adopted and rolled the son presents 90 degrees to arrange (it is handed in that this is too alternately vertically each other Name origin of the sub bearing that the fork rolls) ,Roll between the son equipping with the intersection of interval and keepers or isolating piece, can prevent, roll slope of son or roll during son rubing and examining each other, have prevented rotating the increase of the torsion effectively.
Cylinder roll son dish keep in touch the bearing for line with roll. Load ability is great, mainly bear radial load. Roll body and one set of circles and block friction is small, suitable for rotating at a high speed. Block can divide, have NU, NJ, NUP, N, NF the intersection of uniline and cylinder get away sub bearing according to sets of circle, NNU, NN,etc. pair list cylinder, get away sub bearing. This bearing is structure that an inner circle, outer lane can be separated.
Inner circle or outer lane have cylinder to block side roll sub bearing, its inner circle and outer lane can to relatively move axially, so can serve as free end bearing. Have pair block sets of circle of the other side have, block cylinder of side, get away sub bearing singly in inner circle with some of outer lane, can bear the axial load of a direction to a certain degree. Generally use the stencil plate to press and keep the shelf, or the copper alloy car makes the entity to keep the shelf. Use polyamide to take shape and keep the shelf while being some too.
1. Roll son dish keep in touch or build, roll off the production line, keep in touch for line, radial bearing capacity loud with roll, suitable for bearing carrying on one’s shoulder or back and impact load of heavy load. [2]2. The coefficient of friction is small, suitable for the high speed, the terminal rotational speed is close to the deep ditch ball bearing.
3. N type and NU type can move axially, can adapt to the axle caused by thermal expansion or installation error and change of outer cover relative position, can make the end of freedom to support and use.
4. Expect relatively much to the processing of the axle or seat hole, the axis of the outer lane is relatively askew to add and control severely after the bearing is installed, so as not to cause and exposed to the stress centralizedly.
5. The inner circle or outer lane can be separated, easy to install and dismantling.
Cylinder roll son dish present line, keep in touch, radial loaded ability loud with roll. Suitable for bearing the heavy load and assaulting the load, is suitable for the rotation of high speed.
Cylinder roll sub bearing get away dish and roll the body to present the geometirc shape. After improving the design, have higher bearing capacity, block and new structural design of the sub terminal surface of rolling, not merely improved the axial bearing capacity of the bearing, improved the sub terminal surface of rolling with blocking and contacting the lubricated condition of the area at the same time, have improved the service ability of the bearing.
Large and medium sized motor, rolling stock, main shaft of the lathe, internal-combustion engine, generator, gas turbine, gearbox, rolling mill, shaking sifting and handling machinery,etc..



The name of product: Import the new type of the sub bearing of rolling of NTN NUP305E cylinder: NUP305E old type: 92305E internal diameter: 25( mm) External diameter: 62( mm) Thickness: 17( mm) Weight: 0.251( kg) Bearing material: High-carbon chromium bearing steel (quench completely type completely) (GCr15) Use: Common Type: Sub bearing of the cylinder roller










  • Leave a Reply

    * Required
    ** Your Email is never shared