preload preload preload preload

Clutch bearing 30630042 of high-quality car


2nd December 2015 Bearing products 0 Comments


Function introduction

Applicable style; Toyota


Separation bearing of the clutch

Clutch separate bearing install between clutch and gear box, separate the intersection of bearing and flat, loose, fit first gear box at the the intersection of axle and tube extension that bearing stamp, make the protruding shoulder which separates the bearing support and separate the fork all the time through the return spring, and retreat to the last position, with separating the tip of lever (separate to point) Keep about 3~4mm of intervals.

Because the clutch presses one, separates levers to synchronize with bent axle of the engine operating, and separating the fork can only move axially along the output shaft of the clutch, it is obviously not all right to set aside and separate levers by separating the fork directly, can make it move axially along the output shaft of the clutch while rotating not to separate levers through separate bearing, thus has guaranteed the clutch can be jointed smooth-goingly, separates softly, reduce the abrasion, lengthen service life when clutch and the whole transmission are.

Performance is required

Clutch separate bearing it moves to be should flexible, have sharp noise or stagnat phenomenon of Carlos, its axial interval can’t exceed 0. 60mm, the circle of inner seat can’t exceed 0 abrading. 30mm



The name of product: Clutch bearing 30630042 of high-quality car New type: 30630042 bearing materials: High-carbon chromium bearing steel (quench completely type completely) (GCr15) Use: Car clutch Type: Car bearing










  • Leave a Reply

    * Required
    ** Your Email is never shared