preload preload preload preload

Adjust the ball bearing Sino-Kazakhstan bearing of heart 1304 HZB


23rd October 2015 Bearing products 0 Comments


Bearing of the Sino-Kazakhstan bearing 1304

1304 adjusts heart ball bearing parameter, specification, 1304 (20*52*15mm) Bearing type: Adjust the heart ball bearing
Our country’s new type: 1304
Our country’s old type: 1304
Internal diameter (mm) : 20mm ( 0.7874in)
External diameter (mm) : 52mm ( 2.0472in)
Width (mm) : 15mm ( 0.5906in)
Weight (KG) : 0.163
Basic specified dead load (kN) : 3.30 (336.73KG)
Basic amount moves load (kN) : 12.4 (1265.31KG)
Lubricated rotational speed (r/min) of the lipoprotein : 13000
Lubricated rotational speed (r/min) of oil : 15000



Sino-Kazakhstan bearing 1304K H304 bearing

1304K H304 adjusts heart ball bearing parameter, specification, 1304K_H304 (20*52*44mm) Bearing type: Adjust the heart ball bearing
Our country’s new type: 1304K H304
Our country’s old type: 11303
Internal diameter (mm) : 20mm ( 0.7874in)
External diameter (mm) : 52mm ( 2.0472in)
Width (mm) : 44mm ( 1.7323in)
Weight (KG) : 0.266
Basic specified dead load (kN) : 3.35 (341.84KG)
Basic amount moves load (kN) : 12.4 (1265.31KG)
Lubricated rotational speed (r/min) of the lipoprotein : 13000
Lubricated rotational speed (r/min) of oil : 15000



Sino-Kazakhstan bearing 1304TNI bearing


1304TNI adjusts heart ball bearing parameter, specification, 1304TNI (20*52*15mm) Bearing type: Adjust the heart ball bearing
Our country’s new type: 1304TNI
Internal diameter (mm) : 20mm ( 0.7874in)
External diameter (mm) : 52mm ( 2.0472in)
Width (mm) : 15mm ( 0.5906in)
Weight (KG) : 0.169
Basic specified dead load (kN) : 4.00 (408.16KG)
Basic amount moves load (kN) : 14.2 (1448.98KG)
Lubricated rotational speed (r/min) of the lipoprotein : 12000
Lubricated rotational speed (r/min) of oil : 15000




Sino-Kazakhstan bearing 1304K bearing

1304K adjusts heart ball bearing parameter, specification, 1304K (20*52*15mm) Bearing type: Adjust the heart ball bearing
Our country’s new type: 1304K
Our country’s old type: 111304
Internal diameter (mm) : 20mm ( 0.7874in)
External diameter (mm) : 52mm ( 2.0472in)
Width (mm) : 15mm ( 0.5906in)
Weight (KG) : 0.161
Basic specified dead load (kN) : 3.30 (336.73KG)
Basic amount moves load (kN) : 12.4 (1265.31KG)
Lubricated rotational speed (r/min) of the lipoprotein : 13000
Lubricated rotational speed (r/min) of oil : 15000



Sino-Kazakhstan bearing 1304KTN1 bearing

1304KTN1 adjusts heart ball bearing parameter, specification, 1304KTN1 (20*52*15mm) Bearing type: Adjust the heart ball bearing
Our country’s new type: 1304KTN1
Our country’s old type: 111304A
Internal diameter (mm) : 20mm ( 0.7874in)
External diameter (mm) : 52mm ( 2.0472in)
Width (mm) : 15mm ( 0.5906in)
Weight (KG) : 0.169
Basic specified dead load (kN) : 4.00 (408.16KG)
Basic amount moves load (kN) : 14.2 (1448.98KG)
Lubricated rotational speed (r/min) of the lipoprotein : 12000
Lubricated rotational speed (r/min) of oil : 15000
Adjusting the heart ball bearing has two kinds of structure of cylinder hole and taper hole, the material which keeps the shelf is stencil plates, synthetic resin,etc.. It features the outer lane rolls one takes the form of sphere, adjust the disposition, the error that can compensate different heart degree and axle deflection causes automatically, but its inner, relative gradient of outer lane can’t exceed 3 degrees. Aim at the error and have modulability to the angle. Sealed too and design that needn’t be lubricated again, are suitable for not needing the operating mode maintained. The ones that installed in fixing set and SKF pillow type bearing seat closely adjusted the heart ball bearing automatically and offered the bearing of customer’s economy to dispose. 2.1 cylinder holes adjust the (10000 type) heart ball bearing 2.2 taper holes adjust the heart ball bearing (1000K type) 2.3 takes and fixes adjusting the heart ball bearing (1000K H0000 type) of set closely . The structural form of ball bearing is as follows, to adjust the heart Take and build dustproofly and already fill with the deep ditch ball bearing with sealed circle in right amount of lubricating grease while assembling, needn’t wash to should not heat either before installing, use and did not need to lubricate in the course, adapt to running between temperature – 30 ¡æ to 120 ¡æ. Because it have two roll ball and cambered surface in outer lane roll line, transfer heart ball bearing, can transfer the heart automatically, and can bear the angle error between axle and bearing seat, the operating mode that is suitable for the axle appears while bending and wrong easilying. It has two kinds of structure of cylinder hole and taper hole, the material which keeps the shelf is stencil plates, synthetic resin,etc.. The friction of adjusting the heart ball bearing is lowest in all rolling bearings, so even in case of high rotational speed, still only have smaller Wen Sheng. Sector application: Suitable for accurate instrument, electrical machinery, car, motorcycle and general machinery with low noise,etc., use the most extensive kind of bearing in the mechanical industry. One presents the sphere to adjust the heart ball bearing outer lane and roll, can adjust heart performance and so can not be adjusting the axis caused by the fact that axle or outer cover bends or not with the heart automatically.




The name of product: Adjust the heart ball bearing – Sino-Kazakhstan bearing 1304 HZB new type: 1304 old types: 1304 internal diameters: 20( mm) External diameter: 52( mm) Weight: 0.163( kg) Bearing material: Carburization bearing steel (surface hardening type) Use: Common Type: Adjust the heart ball bearing










  • Leave a Reply

    * Required
    ** Your Email is never shared