preload preload preload preload

7036CTA/DB bearing


27th August 2015 Bearing products 0 Comments

Uniline horn exposed to ball bearing, can only bear one axial load of direction, while bearing radial load, will cause additional axial force. And can only limit the axle or outer cover in the axial displacement of a direction. The contact angle that the angle contacts the ball bearing is 40 degrees, so can bear the axial load greatly. It contact ball bearing horn been for separating,inside and outside differ shoulder level of both sides enclosed. Load ability of bearing for improving,will pair the processing is getting lower relatively on shoulder of one side among them, thus let the bearing put into more steel balls.
Pair list horn, exposed to ball bearing, can it bears greater radials to be radial and axial the intersection of union and load and moment load of main fact in load, limit the axial displacement of two respects of the axle. , allow the angle of inclination to depend on internal interval, bearing size, inside design of the bearing and act on strength and moment on the bearing, allow the angle of inclination to guarantee to produce the too high additional stress in the bearing the most largely. If store in the bearing, between the outer lanes in the angle of inclination, will influence the life-span of the bearing, cause the bearing to operate the precision to drop at the same time, the noise of operating increases. Pair list horn, contact ball bearing, adopt nylon, keep the shelf or brass entity keeping the shelf generally. Pair list horn, contact ball bearing, should notice, though the bearing can bear the two-way axial load when the installation, When the bearing uses should pay attention to, make without put the intersection of ball and side of gap roll one bear main load.




The name of product: The new type of 7036CTA/DB bearing: 7036CTA/DB bearing use: The main shaft of the lathe, high-frequency motor, firing steam turbine, centrifugal separator, small-scale car front wheel, differential mechanism pinion axle; Pair lists the angle and contacts the ball bearing: Oil pump, the intersection of thatch and air-blower, air compressor, all kinds of Luo spray the pump, printing machinery by gear box, fuel. Type: The angle contacts the ball bearing










  • Leave a Reply

    * Required
    ** Your Email is never shared