preload preload preload preload

51192 bearings


15th September 2015 Bearing products 0 Comments

Thrust ball bearing can bear the design with loaded thrust to adopt while operating at a high speed, a washer in ditch and one set of circles forms that the ones that are have balls to roll roll. It is the seatpad shape because of one set of circles, so, thrust ball bearing is divided into the flat base cushion type and adjusted seatpad type two kinds of types of sphere of heart. In addition, this kind of bearing can bear the axial load, but can’t bear the radial load. Thrust ball bearing is enclosed and keeps part of a assembly three forming with the steel ball by the circle of stand, axle. The title axle cooperating with axle is enclosed, the title seat circle cooperating with outer cover. The title axle cooperating with axle is enclosed, the title seat circle cooperating with outer cover.
According to being divided into unidirectional thrust ball bearing and two-way thrust ball bearing by the strength situation. Unidirectional thrust ball bearing, can bear unidirectional axial load.
Two-way thrust ball bearing, can bear two-way axial load. Two-way thrust ball bearing, among them enclose and cooperate with axle. The installation of the circle of seat personallies submit the bearing of the sphere, adjust heart performance, can reduce the influence of installing the error. The thrust ball bearing can’t bear radial load, the terminal rotational speed is relatively low.
1. There is unidirectional, two-way two kinds type
2,The thrust ball bearing can only bear axial load, the unidirectional thrust bearing can only bear the axial load of a direction, the two-way thrust bearing can bear the axial load of reversal of two directions.
3,The thrust ball bearing can’t restrain the radial of the axle or body of case from moving, its terminal rotational speed is low, the unidirectional thrust bearing can limit the axial movement of one side of axle or body of case, the two-way bearing can limit the axle or body of case in the axial movements of two directions.
4,When using this kind of bearing, if the heart hour different from axis of the body hole of the case of axle, cause bearing damage too early, for dispel such bad phenomenon, can in reserve 0.5 – the intersection of l and radial clearance of millimetre enclose external diameter and the intersection of case and the intersection of body and hole, while being living. Require the intersection of axle and centre line with the intersection of case and body support surface, should keep vertical still at the same time, for dispel, slope because of the intersection of case and the intersection of body and base of support and the intersection of axle and the intersection of bearing and centre that centre line does not cause vertically, can in cushion on the base of support that enclose of living with elastic calico lining, varnished cloth, leather and able to bear the intersection of oil and rubber pad,etc..
5,Thrust ball bearing, in operation, because of function of mass force, steel ball and get away during dish producing and slipping, and make the temperature increase, the surface of job is apt to damage. So, it is slip to lines of room roll steel ball for preventing from,thrust ball bearing must axial force minimum.
6. In order to permit to install errors, no matter unidirectional or two-way, can choose the sphere to adjust the seatpad type of sphere of heart or take the sphere seat circle type
On only suitable for bearing one side axial load, parts lower in rotational speeding, such as hoist cliver, vertical water pump, vertical centrifuge, jack, low-speed decelerator,etc.. The circles of axle circle, seat and rolling the body of the bearing are separation, can hold and dismantle respectively. Receive, inspire confidence in the intersection of Seiko and the intersection of bearing and Co., Ltd., make more efforts, keep forging ahead, repay the the masses of customer so as to better, more high-efficient service! Telephone number: 0635-2101236 mobile phones: 15288740199 ; 13869552020 ; QQ: 1415514907
The name of product: The new type of 51192 bearings: 51192 bearing uses: On suitable for bearing one side axial load, parts lower in rotational speeding, such as hoist cliver, vertical water pump, vertical centrifuge, jack, low-speed decelerator,etc.. The circles of axle circle, seat and rolling the body of the bearing are separation, can hold and dismantle respectively. Type: Thrust ball bearing










  • Leave a Reply

    * Required
    ** Your Email is never shared