preload preload preload preload

32230J2 bearing


31st October 2014 Bearing products 0 Comments

The taper roller bearing can be separated, can be installed respectively by assembly and outer lane that the inner ring make up together with roller, retainer. The roller can reduce stress concentration to contact the contact line revised in place with the ball track. The taper roller bearing can bear large radial load and axial load. Because the taper roller bearing can only transmit the unidirectional axial load, so, need the taper roller bearing of another one and its symmetrical installation in order to transmit the axial load of the opposite direction. At taper roller bearing consumption at most for uniline for taper roller bearing. In the front wheel wheel nave of the car, use smaller two-bank taper roller bearing too in recent years. Four tapers roller bearing is used in heavy engineerings such as the large-scale and cold, hot-rolling mill,etc..

The name of product: The new type of 32230J2 bearing: 32230J2 bearing use: The taper roller bearing is usually separate type, namely the taper inner circle assembly composed of inner circles with roller and retainer assembly is all right and taper outer lane (outer lane) Install separately; The taper roller bearing is used in trades such as the car, rolling mill, mine, metallurgy, plastic machinery,etc. extensively. Type: Taper roller bearing










  • Leave a Reply

    * Required
    ** Your Email is never shared