preload preload preload preload

IR260X285X60 bearing FAG door shop


27th August 2015 Bearing products 0 Comments
The mechanical ...
Read More »

B 7201 E.T.P4S.UL bearing


27th August 2015 Bearing products 0 Comments
The angle of uniline is exposed to the axial load that the ball bearing can only bear a direction, while bearing radial load, will cause additional axial force. And can only limit the axle or outer cover in the axial displacement of a direction. The contact angle that the angle contacts the ball bearing is 40 degrees, so can bear the axial load greatly. Is it to contact by design of not separating ball bearing horn,inside and outside differ shoulder level of both sides enclosed. For with bearing for load ability,will pair the processing is getting lower relatively on shoulder of one side ...
Read More »

7036CTA/DB bearing


27th August 2015 Bearing products 0 Comments
Uniline horn exposed to ball bearing, can only bear one axial load of direction, while bearing radial load, will cause additional axial force. And can only limit the axle or outer cover in the axial displacement of a direction. The contact angle that the angle contacts the ball bearing is 40 degrees, so can bear the axial load greatly. It contact ball bearing horn been for separating,inside and outside differ shoulder level of both sides enclosed. Load ability of bearing for improving,will pair the processing is getting lower relatively on shoulder of one side among them, thus let the ...
Read More »

QJ334 bearing


27th August 2015 Bearing products 0 Comments
The angle can bear radial load and axial load at the same time while exposed to the bearinging. Can work under higher rotational speed. It is the bigger to be exposed to the angle, the higher axial bearing capacity is. High precision and high-speed bearing usually fetch 15 degrees and contact the angle. Under the function of axial force, contacting the angle will increase. The name of product: The new type of QJ334 bearing: QJ334 bearing use: The main shaft of the lathe, high-frequency motor, firing steam turbine, centrifugal separator, small-scale car front wheel, differential mechanism ...
Read More »

HXD car needle bearing NB102


27th August 2015 Bearing products 0 Comments
Changzhou great XingDa bearing Co., Ltd. specializes in the needle bearing of all kinds of cars, truck bearing, the automobile-used needle bearing of motor, the excavator uses the needle bearing, the nonstandard bearing, the bearing in half a month, the type is up to a thousand kinds. The factory lies in industrialized country of 5 kilometers in the Wujin area of Changzhou, 200,000 sets of monthly output per month, the products all adopt the standard of the enterprises of the international standard and famous company of the people of the same trade at home and abroad to produce, with ...
Read More »

3706/305X4D/HCEP5YAD1 bearing


27th August 2015 Bearing products 0 Comments
The taper rolls the sub bearing can be separated, by the son with rolling of inner circle, keep assembly and outer lane that the shelf makes up together can install respectively. Roll son and roll dish exposed to the intersection of contact and line that place revise, can reduce stress to be centralized. The taper rolls the sub bearing can bear large radial load and axial load. Because the taper rolls the sub bearing can only transmit the unidirectional axial load, so for transmit opposite axial load of direction, need another one and symmetrical taper of installation it get away sub bearing. ...
Read More »

23124CA/W33调心滚子轴承


26th August 2015 Bearing products 0 Comments
山东厂家供应调心滚子轴承23124CA/W33产品名称:供应23124CA/W33调心滚子轴承 新型号:23124CA/W33旧型号:3053724HK内径:120.0000(mm)外径:200.0000(mm)厚度:62.0000(mm)重量:12.400(kg)轴承材料:高温轴承钢用途:通用 类型:调心滚子轴承 ...
Read More »

7330 B轴承


26th August 2015 Bearing products 0 Comments
角接触球轴承可同时承受径向负荷和轴向负荷。能在较高的转速下工作。接触角越大,轴向承载能力越高。高精度和高速轴承通常取15 度接触角。在轴向力作用下,接触角会增大。单列角接触球轴承只能承受一个方向的轴向负荷,在承受径向负荷时,将引起附加轴向力。 并且只能限制轴或外壳在一个方向的轴向位移。若是成对双联安装,使一对轴承的外圈相对,即宽端面对宽端面,窄端面对窄端面。这样即可避免引起 ...
Read More »

7319ADF轴承


26th August 2015 Bearing products 0 Comments
角接触球轴承可同时承受径向负荷和轴向负荷。能在较高的转速下工作。接触角越大,轴向承载能力越高。高精度和高速轴承通常取15 度接触角。在轴向力作用下,接触角会增大。电话021-36329778。产品名称:7319ADF轴承 新型号:7319ADF轴承用途:机床主轴、高频马达、燃汽轮机、离心分离机、小型汽车前轮、差速器小齿轮轴;双列角接触球轴承:油泵、罗茨鼓风机、空气压缩机、各类变速器、燃料喷射泵、印刷机械。 类型:角接触球轴承 ...
Read More »

7910CDB轴承


26th August 2015 Bearing products 0 Comments
单列角接触球轴承只能承受一个方向的轴向负荷,在承受径向负荷时,将引起附加轴向力。 并且只能限制轴或外壳在一个方向的轴向位移。角接触球轴承的接触角为40度,因此可以承受很大的轴向负荷。角接触球轴承是非分离型的设计,内外圈的两侧的肩部高低不一。为了提高轴承的负载能力,会把其中一侧的肩部加工得较低,从而让轴承可装进更多的钢球。 ...
Read More »